All Products

* Pine Decking

• 100X25 Radiata Pine H3.2 Grip Treated
• 150X40 H3.2 Grip Treated
• 100X40 H3.2 Grip Treated

25/7 Scoria

25/7 Scoria is a clean drainage scoria commonly used around drain coil and behind retaining walls. Its size is from 25mm down to 7mm.

50/20 Scoria

50/20 Scoria is a clean drainage scoria commonly used behind retaining walls. Its size is from 50mm down to 20mm.

6g X 32 Drywall Gib Screw 1000/PACK

6Gx 32mm Yellow Zinc Bungle Philips Coarse Lose Drywall Screw (JAR 200)

6g x 32mm - Bugle Head - Phillips Drive - Coarse Thread - Drywall Screw - Collated - Zinc Yellow Plating

• Faster driving threads for wood framing.
• Fits with multiple gun manufacturers.
• Zinc yellow plating provides greater corrosion resistance than a standard zinc screw.
• Bugle Head is ideal when fixing plasterboard to timber or steel frames. Designed to self-embed.

Bar Chair (100/Bag)

Avialable Sizes:

• 25/40MM
• 50/65MM
• 75/90MM

Black Polythene Tape 48mm x 30m

Premium grade tape duct sealing. Reinforcing and mending.

Features and benefits

• Premium grade tape.
• Water tight, moisture resistant.
• Great for duct sealing, reinforcing and�mending.
• Good adhesion to most surfaces.

Block Layers Sand

Block Layers sand is suitable for mixing mortars for block laying and also plaster mixes for paving or concrete block wall finishes.

Bostik Zero Nails Heavy Duty Construction Adhesive Cartridge 300ml

Zero Nails is a heavy duty constructon adhesive for everyday use. 
Zero Nails can be used for

• Interior / Exterior
• Easy gunning
• High bond strength
• Bonds to most surfaces
• Easy gunning
• Fast curing
• Flexible

Available as 300ml cartridge

Budget Plywood 2400X1200MM

When you need a temporary solution and cost is also important, then IBS BUDGET GRADE PLY is the answer.

Strong, thick bonded sheets that are ideal solutions from the construction sites, safety fences to temporary floorings and hoardings.

A non-structural ply that is used in a commercial or residential situation as a temporary use product or where you would throw it away after use.

Great for packaging or hoardings this grade of ply certainly gives you a lot of character on the face veneer.

The grade is best described as DD or lower, with some edge damage and not often but sometimes delamination.

APPLICATIONS

• Hoardings
• Construction site fencing
• Temporary flooring
• Packaging
• Crate construction
• Sidings
• Temporary billboards or signage
• Budget factory lining
• Shoring up damaged buildings
• Boxing
• Fruit Bins
• General Industrial use

Budget Wetwall (Waterproof MDF) 4MM - Glossy White

Builders Grade Plywood 2400X1200MM

IBS BUILDERS GRADE® is part of our non-structural range of plywood and offers the following benefits:

• Super EO Low formaldehyde emissions
• WBP A Bond Glue Line
• Thickness calibration
• Strength
• Stiffness and stability characteristics
• Full Radiata Pine face and core
• Produced from PEFC Certified sustainable plantations
• All products are Ultrasound tested for Blows

They are not tested to the AS/NZS 2269 Standard, however all panels are certified according to international standards such as European CE-EN 13986, US PS1-09 or Japanese JAS, manufactured by ARAUCO under strict quality control.

APPLICATIONS

• Wall Hoardings
• Sand Pits
• Shelving
• Building the dog house or kids playhouses
• Landscaping fencing
• Formwork for paths and driveways
• Motorway sidings
• Making furniture or toys
• Temporary weatherproofing for damaged buildings

Builders Mix

A mix of sand and high quality aggregate ideal for mixing with cement for any concreting jobs.

Ceramic Tile Underlay 6MM

Superior Performance, Dimensionally Stable Tiling Substrate.

SHEET SIZES

• 1800 x 900 x 6mm
• 1800 x 1200 x 6mm

Certified Premix Concrete

Cladding Plywood 2440X1200MM 12MM H3.1

IBS PlyClad is an ideal product for exterior cladding, fencing or a feature wall project.

Being manufactured by one of the most hi-tech plywood manufacturing plants in the world means that you can use IBS PlyClad with confidence.

Not only has IBS PlyClad been tested in NZ by Scion to the P21 Certificate but it is also manufactured to International Standards such as European CE-EN 13986, US PS1-09 and Japanese JAS.

Super E0 Emissions mean that it is the lowest possible available and actually means that it has less Formaldehyde emissions than Shell Fish.

IBS PlyClad has been manufactured with the environment in mind and with the PEFC Certification, you can rest assured that you are using a sustainable and renewable product.

IDEAL APPLICATIONS

• Exterior Cladding for your Home
• Exterior Cladding for your Barn or Man Cave
• Exterior Cladding for your Kid's Playhouse
• Building the Dog House
• Landscaping and Fencing
• Feature Walls in your Home or Office

PRODUCT DESCRIPTION

• IBS PlyClad 1200 has a bandsawn texture over the whole face
• IBS PlyClad 150 has a bandsawn texture and vertical grooves at 150 centres
• Untreated and Treated Available
• Treatment is H3.1 AS/NZS 1604.3
• Emissions Level Super E0
• Pinus Radiata PEFC Certified
• A Bond Phenolic Glue

AVAILABLE SIZES (mm)

SHEET SIZES 

2440 x 1200 x 12

Concrete

Concrete Pump Truck Hire

Decorative Plywood 2400X1200MM

IBS Deco-Select Plywood is a high grade plywood designed for use in highly visual applications.

IBS Deco-Select Plywood is certified according to international standards such as the European CE-EN 13986, US PS1-09 or Japanese JAS standards.

Manufactured by Arauco under strict quality control standards, IBS DECO SELECT PLY also offers Super E0 Low formaldehyde emission, WBP A-Bond glue line, thickness calibration and a full 150 grit sanding, strength and also the assurance that the product is produced from PEFC Certified sustainable Radiata Pine plantations.

APPLICATIONS

• Wall and ceiling lining
• Furniture and cabinets
• Decorative panels
• Substrate for high pressure laminate
• Speakers
• Counter tops
• Lining your sport facilities such as gyms or school halls
• Lining convention centres
• Soffit lining
• General Do It Yourself (DIY) uses

AVAILABLE SIZES (mm)
SHEET SIZES

• 2400 x 1200 x 9
• 2400 x 1200 x 12
• 2400 x 1200 x 18

Drain Coils

Drainage Metal

A substitute for scoria in certain parts of the country. It is a clean metal commonly used around drain coil and behind retaining walls. Its size is from 20mm - 40mm in diameter. 
Waiheke Island yard has a 7/14, 20/40 and 40/60 drainage metal. 
Silverdale has a 20/40 drainage metal.

Drymix Easy To Mix Concrete

Perfect for poles, posts and pathways, just add water.

Features and benefits

• Simple to prepare concrete.
• Achieves a 28-day strength of 20mpa.

Drymix Hi-Strength Quick to Set Concrete 25kg

Ideal for the placement of heavy posts, decks, retaining walls, or any project requiring high strength concrete.

Features and benefits

• Easy to use.
• Fast setting.

East Coast Sand

Uses:

Great for sand pits, on top of paving and mortar.

Description:

East Coast Sand is a an east coast beach sand. It is washed but will still contain salt content. It has a very even grading of particle size, which gives you smaller voids and therefore stronger products and is hugely popular with brick layers and for plastering manholes etc. We also sell hundreds of bags of this product each year for kids sandpits, why? Simple, it makes the best sandcastles!

Features and Benefits:

• Washed
• With its dense consistancy it makes great mortar
• Great for sand pits!

ECKO Joist Hanger Nails 3.33X38MM Gavl 2000/VALUE PACK

ECKO Joist Hanger Nails

Joist Hanger Nails/Product Nails

Range: 38mm

Finish: HD Galv, S/Steel

Tool: ECKO Joist Hanger Nailer(PN38)

ELINE Plywood 2400X1200MM

EPS Foam

Fence Paling Standard 150X19MM Radiata Pine H3.2 Rough Sawn

Available Lengths

• 1200MM
• 1500MM
• 1800MM
• 2100MM
• 2400MM

Fence Post 100X100 Radiata Pine H4 Rough Sawn

Fence Post 100X75 Radiata Pine H4 Rough Sawm

Fence Rail 100X50MM Radiata Pine H3.2 Rough Sawn 4800MM

Fence Rail 75X50MM Radiata Pine H3.2 Rough Sawn 4800MM

Fencing Pickets 70X19 H3.2 MG Clear

Fibre Cement Board 4.5MM - 6MM

PRIMAflex™ is a multi-purpose board with superior fire performance, dimensional stability and durability.

PRIMAflex™ is suitable for ceiling and eave lining, partitions, gable ends, external wall cladding, panelling and other building applications.

PRIMAflex™ comes with a smooth surface and square edges, is easy to work on and offers an excellent base for a good paint finish surface.

PRIMAflex™ has superior fire performance, dimensionally stable and requires low maintenance

FEATURES

• Fire-resistance
• Highly resistant to decay, termite and rodent attack and most chemicals
• Weather resistant
• Structurally strong
• Ideal substrate for various types of coatings
• Good workability
• Smooth Surface
• Square edges on all 4 sides
•  

AVAILABLE SIZES (mm)
SHEET SIZES 

• 1800 x 1200 x 4.5
• 2400 x 300 x 4.5
• 2400 x 450 x 4.5
• 2400 x 600 x 4.5
• 2400 x 750 x 4.5
• 2400 x 900 x 4.5
• 2400 x 1200 x 4.5
• 2700 x 900 x 4.5
• 2700 x 1200 x 4.5
• 3000 x 900 x 4.5
• 3000 x 1200 x 4.5
• 1800 x 1200 x 6
• 2700 x 900 x 6
• 2700 x 1200 x 6
• 3000 x 1200 x 6

Tags

• FIBRE CEMENT BOARD
• EAVE LINING
• FIRE RESISTANCE
• FLEX

Flooring Plywood 2400X1200MM PlyFloor

IBS PlyFloor Flooring Plywood has been designed for use as a flooring substrate as well as an ideal substrate under roofing or decking rubber membranes. Being certified to AS/NZS 2269 to a strength grade of F11 gives the assurance of structural integrity along with the knowledge that this is a product designed for use in New Zealand.

IBS PlyFloor is certified A bond using an Exterior Phenol-Formaldehyde resin, emission class E0, complying with other international Low Formaldehyde Emission (LFE) requirements like JAS Super-E0.

GRADE

CD: Superior grade with no knotholes and no more than 8 wood patches with limited synthetic repairs on the face. Surfaces are sanded with a 150 grit three step process.

IBS ARAUCOPLY Flooring has a plastic tongue and groove along each long edge.  This means no blocking is necessary under long edge joints saving time and money, and also helps reduce squeaking.

Framing Timber SG8 H.12 MG Treated

90X45

145X45

GAP 20

GAP 20 metal is commonly used for driveways, pathways, or as a base course for concrete & paving. Once compacted Gap 20 binds together very well.

GAP 40

• GAP 40 Metal is most commonly used for a base under metal driveways, under paving or as a base layer under concrete.

GAP 7

GAP 7 is a fine metal which is generally used and compacted under pavers or as a base layer before laying concrete.

Garapa - Hardwood Decking Timber

Common Name
Garapa Apuleia mollaris

Other Names
Grapia

Country of Origin
South America

Garapa is a light yellow to honey-brown colour and its interlocked grain has a fine texture. It is a very durable timber that resists rot, decay and fire. The timber is lustrous and does not bleed. It has a high silica content and is scratch resistant. Primarily used as a kiln-dried decking timber. Garapa carries either independent FSC100% certification it is sourced from legal and wellmanaged resources.

Mainly used for

• Decking
• Structural flooring
• Construction

GIB LITE BLUE® 90MIN 17.5KG

GIB Lite Blue® is specifically formulated to be easier to and is well suited as a second coat compound.

A lighter weight compound, but with coverage equal to that of heavy weight compounds.

Features & Benefits

• Easy to Sand
• Excellent for Machine Tools
• Strong Joints
• Smooth Finish
• GIB Lite Blue® is available in 17.5kg bags

GIB PLUS 4®

GIB Plus 4® is a ready-mixed air drying compound incorporating excellent taping and finishing properties in a single light weight compound that can be used straight from the pail for most applications.

GIB Plus 4® combines high levels of binder and sanding aids to ensure that the compound has excellent strength and adhesion to many substrates, while remaining sandable.

Applications

• GIB Plus 4® is suitable for taping and finishing joints. Not suitable for holes/gaps greater than 4mm or 1mm deep.
• Suitable for use over painted substrates, with appropriate preparation
• GIB Plus 4® is the only compound recommended by Winstone Wallboards Ltd for hand applied skim coats

Features & Benefits

• Excellent joint strength (in conjunction with paper tape)
• Sandable
• Use for Skim Coating
• GIB Plus 4® is available in a 4L, 10L & 15L pail

GIB PROMIX® ALL PURPOSE 15L PAIL

GIB ProMix® All Purpose is a ready-mixed air drying compound incorporating excellent taping and finishing properties.

It is a mid weight compound that can be used straight from the pail for most applications. GIB ProMix® All Purpose has been formulated for use with machine application tools and sanding machines, but is equally good for hand application.

Application

• Suitable for taping and finishing joints
• Not suitable for holes/gaps greater than 4mm or 1mm deep.
• Slightly harder finish reduces the likelihood of scratch marks appearing during machine sanding
• Great for use in application tools due to its consistency

Features & Benefits

• Excellent adhesion to many substrates
• Excellent joint strength (in conjunction with paper tape)
• Great through machine tools
• Machine sandable
• GIB ProMix® All Purpose is available in a 4L, 10L & 15L pail

GIB TRADE FINISH® HEAVY WEIGHT 15L PAIL

GIB Trade Finish® Heavy Weight is a premium heavyweight compound designed for finishing joints in GIB® plasterboard. 

Applications

• Suitable as a finishing coat over GIB® basecoats
• Suitable for application with mechanical finishing boxes
• Suitable for sanding by hand and with sanding machine

Features & Benefits

• Super slick heavyweight compound, easy on wrists if applied by trowel
• Low shrinkage and easier to achieve a smooth finish
• Harder finish and less likely to scratch
• Great "body" to control build up of compound
• Yellow tint to easily distinguish from basecoat compounds
• GIB Trade Finish® Heavy Weight is available in a 15L pail and 14L refill carton.

GIB TRADE FINISH® LITE

GIB Trade Finish® Lite is a new premium lightweight compound designed for finishing joints in GIB® plasterboard. GIB Trade Finish® Lite is also suitable for use as a basecoat compound.  

Applications

• Suitable as a finishing and as a basecoat 
• Suitable for application by trowel or with mechanical finishing boxes
• Suitable for sanding by hand

Features & Benefits

• Super slick to trowel
• Low shrinkage and easier to achieve a smooth finish
• Easy to sand lightweight finishing compound
• Yellow tint to easily distinguish from basecoat compounds
• GIB Trade Finish® Lite is available in a 18.7kg (15L) pail and a 17.5kg (14L) refill carton.

GIB TRADE FINISH® MULTI

GIB Trade Finish® Multi is a new premium mid-weight compound and is suitable for use on all three coats.  

It's sanding and scratch resistance characteristics are balanced between the easy to sand GIB Trade Finish® Lite and the more scratch resistant GIB Trade Finish® Heavy Weight.  This ready-mixed air-drying compound can be used straight from the pail and has been forumlated for use with machine tools or hand application.

Applications

• GIB Trade Finish® Multi is suitable for taping and finishing joints.  Not suitable for holes/gaps greater than 4mm wide or 1mm deep
• Suitable for application by trowel or with mechanical finishing boxes
• Suitable for sanding by hand and with a sanding machine

Features & Benefits

• Super slick to trowel
• Low shrinkage and easier to achieve a smooth finish
• Yellow tint to easily distinguish from basecoat compounds
• GIB Trade Finish® Multi  is available in a 10 and 15L pail and 14L refill carton

GIB TRADESET®

A premium setting compound available in 20, 45, 90 and 150 minute set times.

Feature & Benefits

• A lower mixing consistency makes this plaster harder and faster drying.
• Faster jointing
• Superior trowelability
• Low shrinkage
• Choice of setting times
• Low wastage
• Available in 5kg & 20kg bags except GIB Tradeset® 150 which is only available in a 20kg bag

GIB-COVE® BOND

GIB-Cove® Bond is a plaster based adhesive for bonding GIB-Cove® to GIB®Plasterboard surfaces.

It may also be used for laminating GIB® Plasterboard, reinforcing GIB® Plasterboard joints by back-blocking and for direct bonding of GIB® Plasterboard to masonry and concrete walls.

Features & Benefits

• Smooth and lump free consistency over full working time
• Mixes easily by hand
• Excellent tack and initial bonding properties
• GIB-Cove® Bond 45mins is available in 5kg & 20kg bags
• GIB-Cove® Bond 90mins is available in 20kg Bags