Structural Board

Flooring Plywood 2400X1200MM PlyFloor

IBS PlyFloor Flooring Plywood has been designed for use as a flooring substrate as well as an ideal substrate under roofing or decking rubber membranes. Being certified to AS/NZS 2269 to a strength grade of F11 gives the assurance of structural integrity along with the knowledge that this is a product designed for use in New Zealand.

 

IBS PlyFloor is certified A bond using an Exterior Phenol-Formaldehyde resin, emission class E0, complying with other international Low Formaldehyde Emission (LFE) requirements like JAS Super-E0.

 

GRADE

CD: Superior grade with no knotholes and no more than 8 wood patches with limited synthetic repairs on the face. Surfaces are sanded with a 150 grit three step process.

IBS ARAUCOPLY Flooring has a plastic tongue and groove along each long edge.  This means no blocking is necessary under long edge joints saving time and money, and also helps reduce squeaking.

Laminex Strandfloor®

Trade Essentials Strandfloor is a high density reconstituted wood panel bonded with moisture resistant resin and wax, specifically formulated for use as residential and commercial interior floor platforms. Strandfloor products comply with the sheet flooring requirements of the New Zealand Building Code.

 

Strandfloor® is declared as Red List Free in the Declare Products Database. This is a globally recognised nutrition label for the building products industry, formed as part of the Living Building Challenge. Red List Free products have all ingredients disclosed in the Declare database and none of those ingredients appear on the Living Building Challenge Red List.

 

 

There are four product options all 20mm thick to cover your building requirements.

 

Strandfloor Square Edge is an all-purpose wood based high density flooring material.

 

Strandfloor Tongue & Groove is identical to Strandfloor Square Edge in its manufacture but has the enhancement of a polypropylene tongue that gives the required sheer strength and eliminates the need for solid timber nogs to the long edge.

 

StrandfloorH3.1 Square Edge is the premium flooring material. Improved resin composition provides increased weathering performance with the added benefit of meeting New Zealand building requirements for use in wet areas.

 

StrandfloorH3.1 Tongue & Groove is identical to StrandfloorH3.1 Square Edge in its manufacture but has the enhancement of a polypropylene tongue that gives the required sheer strength and eliminates the need for solid timber nogs to the long edges.

Roofing Plywood 2400X1200MM 15MM Plyroof

IBS PlyRoof Roofing Plywood is a structural product that is designed for use under shingles. Being certified to AS/NZS 2269 to a strength grade of F11 gives you the assurance of the structural integrity along with the knowledge that this is a product designed specifically for use in New Zealand.

IBS PlyRoof is a certified A bond using an Exterior Phenol-Formaldehyde resin emission class E0, complying with other international Low Formaldehyde Emission (LFE) requirements like JAS Super-E0.

 

GRADE

DD: Solid face with wood patches and synthetic repairs. Finished with a 100 grit three step sanding process.

IBS ARAUCOPLY Roofing has a plastic tongue and groove along each long edge.  This means no blocking is necessary under long edge joints saving time and money, and also helps reduce squeaking.

 

AVAILABLE SIZES (mm)

SHEET SIZES 

  • 2400 x 1200 x 15

Structural Plywood 2400X1200MM

IBS ARAUCOPLY is fully inline certified to New Zealand standards by SAI Global.

IBS ARAUCOPLY has been manufactured and tested to meet all requirements of Plywood Structural Standard AS/NZS 2269 in products that are stamped and labelled accordingly.

IBS ARAUCOPLY is certified A bond using an Exterior Phenol-Formaldehyde resin, emission class E0, complying with other international Low Formaldehyde Emission (LFE) requirements like JAS Super-E0.

The veneers used to lay-up the product have been kiln dried to a moisture content of around 8%.

 

GRADES

CD: Superior grade with no knotholes and no more than 8 wood patches with limited synthetic repairs on the face. Surfaces are sanded with a 150 grit three step process.

DD: Solid face with wood patches and synthetic repairs. Finished with a 100 grit three step sanding process.

Online Order Delivery

Three Brothers deliver online orders within the Greater Auckland Area, delivery charges are between $65-$120 (excl GST). Alternatively, you could pick up your order from our Mt Wellington store. 

Price Match

We offer PRICE MATCH to ensure you get the best deal across internet.

NZ Timber Selection Guide

Product Stock

We keep everything we sell online in stock, however, in order to avoid the unlikely event of no-stock, please enquire for availablity. If not in stock it would be normally available within 48 hours.